콘텐츠로 건너뛰기
STAGING SERVER
DEVELOPMENT SERVER

Device Temperature#

Device Temperature camera feature를 사용하면 코어 보드, 이더넷 PHY 컴포넌트(사용 가능한 경우), 센서 보드 또는 카메라 하우징 등 카메라 내 여러 위치의 카메라 온도를 확인할 수 있습니다.

Temperature State 기능(사용 가능한 경우)을 사용하여 카메라의 현재 내부 온도 상태를 확인하십시오.

기능 사용법#

Device Temperature 확인하기#

Device Temperature를 확인하려면:

  1. 만약 DeviceTemperatureSelector 파라미터를 사용할 수 있는 경우, 온도를 측정할 위치로 해당 파라미터를 설정하십시오(예: Sensor.
  2. 다음의 값을 가져옵니다: DeviceTemperature 파라미터.

온도는 섭씨(°C) 단위의 부동 소수점 값으로 제공됩니다.

샘플 코드#

ace 2, boost 및 dart R 카메라#
// Set the measuring location to sensor
camera.DeviceTemperatureSelector.SetValue(DeviceTemperatureSelector_Sensor);
// Get the current device temperature
double d = camera.DeviceTemperature.GetValue();

INodeMap& nodemap = camera.GetNodeMap();
// Set the measuring location to sensor
CEnumParameter(nodemap, "DeviceTemperatureSelector").SetValue("Sensor");
// Get the current device temperature
double d = CFloatParameter(nodemap, "DeviceTemperature").GetValue();

// Set the measuring location to sensor
camera.Parameters[PLCamera.DeviceTemperatureSelector].SetValue(PLCamera.DeviceTemperatureSelector.Sensor);
// Get the current device temperature
double d = camera.Parameters[PLCamera.DeviceTemperature].GetValue();

/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
double d = 0;
/* Set the measuring location to sensor */
errRes = PylonDeviceFeatureFromString(hdev, "DeviceTemperatureSelector", "Sensor");
CHECK(errRes);
/* Get the current device temperature */
errRes = PylonDeviceGetFloatFeature(hdev, "DeviceTemperature", &d);
CHECK(errRes);

# Set the measuring location to sensor
camera.DeviceTemperatureSelector.Value = "Sensor"
# Get the current device temperature
d = camera.DeviceTemperature.Value
ace Classic/U/L GigE 카메라#
// Get the current device temperature
double d = camera.TemperatureAbs.GetValue();

INodeMap& nodemap = camera.GetNodeMap();
// Get the current device temperature
double d = CFloatParameter(nodemap, "TemperatureAbs").GetValue();

// Get the current device temperature
double d = camera.Parameters[PLCamera.TemperatureAbs].GetValue();

/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
double d = 0;
/* Get the current device temperature */
errRes = PylonDeviceGetFloatFeature(hdev, "TemperatureAbs", &d);
CHECK(errRes);

# Get the current device temperature
d = camera.TemperatureAbs.Value
기타 카메라#
// Get the current device temperature
double d = camera.DeviceTemperature.GetValue();

INodeMap& nodemap = camera.GetNodeMap();
// Get the current device temperature
double d = CFloatParameter(nodemap, "DeviceTemperature").GetValue();

// Get the current device temperature
double d = camera.Parameters[PLCamera.DeviceTemperature].GetValue();

/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
double d = 0;
/* Get the current device temperature */
errRes = PylonDeviceGetFloatFeature(hdev, "DeviceTemperature", &d);
CHECK(errRes);

# Get the current device temperature
d = camera.DeviceTemperature.Value

또한 pylon Viewer를 사용하여 파라미터를 손쉽게 설정할 수 있습니다.